GRP 28ft Motor Sailer
- Bateau REF# · 167452
- Longeur hors tout · 8.53m
- Année · 1988
- Construction · Fibre de Verre
- Coque · Quille longue
- Couchettes · 2
- Moteur · 1 x gasoil 30cv, Nanni ()
- Visible à · Rackheath, Norwich
Ce bateau est vendu Voici d’autres bateaux à vendre
Détails supplémentaires
| Visible à | Rackheath, Norwich |
|---|---|
| Capacité carburant | 60.0 L Total - 1 Cuve(s) |
| Capacité d'eau | 100.0 L Total - 1 Cuve(s) |
Mécanique
| Moteur | 1 x gasoil 30cv |
|---|---|
| Marque et le modèle du moteur | Nanni () |
| Heures moteur | Inconnu |
| Refroidi par | Indirect |
| Barre | barre à roue |
| Transmission | arbre d'hélice |
| Hélice(s) | 3 blade bronze |
| Consommation carburant (approx) | 2.0 L /hr A vitesse de croisière |
| Vitesse de croisière | 5 noeuds |
Dimensions
| Longeur hors tout | 8.53m |
|---|---|
| Longeur flottaison | 8.53m |
| Bau | 2.74m |
| Tirant d'eau Min | 1.07m |
| Tirant d'eau Max | 1.06m |
| Tirant d'Air | 1.83m |
| Hauteur sous barrots | 1.85m |
| Stationnement | Port a sec |
Systèmes électriques
12 batterie volts, 1 batterie(s) chargé(s) par: moteur, prise de quai
Construction
| Construction | Fibre de Verre |
|---|---|
| Coque | Quille longue |
| Finition | Peinture finition |
GRP Motor Cruiser based on a Motor Sailor
Aménagements
| Nombre total de couchages | 2 |
|---|---|
| Nombre de lits simples | 2 |
| Cabines | 2 |
2 berths in Fwd cabin
Aménagements
| Evier | |
|---|---|
| Glacière | |
| Frigo | |
| Moquette | |
| Système d'eau sous pression | |
| Four à micro-ondes |
2 berths in Fwd cabin
Accastillage de pont
électrique guindeau
1 ancre(s)
(Plough)
10.00m de chaîne
Equipement de Navigation
| Vitesse | |
|---|---|
| Radar | |
| GPS | |
| Navtex | |
| Weather fax | |
| Feux de navigation |
Equipement de Sécurité
1 pompes de cale (0 manuel / 1 électrique)
No BSC
Commentaires du Broker
This absolutely stunning vessel has been restored to a standard the likes of which I have never seen.
It really is that good. The current owner informs me he bought her as a "project" to work on over the winter 2 years ago. He owns a GRP moulding company within the marine environment and has put 100's of hours in to this boat over the past 2 years. The result really is amazing....She is now 90% finished and requires a gas cooker (microwave already fitted), a little wiring and a BSC to complete her.
My pictures were taken with her inside the workshop where she has sat and I apologise that I cannot do this boat justice.
You really do need to see this boat to appreciate the craftsmanship that has gone in to her. I valued her at 28k finished.
One not to be missed if you are looking for a boat that looks far better than new ever was. There has been a lot of thought gone in to the design in all areas.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.